Datalogic Scanning POWERSCAN 7000 - Manual (Page 134)

OCR Programming
8-4 PowerScan ® 7000 2D
MICR E13 B Font
MICR E13 B On allows you to scan MICR characters on a bank check.
The default setting allows you to scan any eight digit combination. If
you have created an OCR template, character combinations that fit the
template can be scanned (see
Creating an OCR Template on page 8-5 ).
SEMI Font
SEMI Font On allows you to scan the SEMI font used in the semiconduc-
tor industry.
All OCR Off turns off all OCR capability in the imager, so the imager will
be able to scan linear, stacked, matrix, and composite bar codes, but not
OCR fonts. However, any OCR templates you have created will be
retained in memory.
NOTE
TOAD characters (Transit, On Us, Amount and
Dash) are output in the following manner:

The Transit character is output as T

The On Us character is output as O

The Amount character is output as A

The Dash character is output as D
MICR E 13 B On
SEMI Font On
* All OCR Off