Datalogic Scanning POWERSCAN 7000 - Manual (Page 72)

Symbologies
6-4 PowerScan ® 7000 2D
When Check Character is set to Validate, but Don’t Transmit, the unit
will only read Codabar bar codes printed with a check character, but will
not transmit the check character with the scanned data.
Codabar Concatenation
Codabar supports symbol concatenation. When you enable concatena-
tion, the imager looks for a Codabar symbol having a “D” start character,
adjacent to a symbol having a “D” stop character. In this case the two
messages are concatenated into one with the “D” characters omitted.
Default = On.
Select Require to prevent the imager from decoding a single “D” Coda-
bar symbol without its companion. This selection has no effect on Cod-
abar symbols without Stop/Start D characters.
* No Check Character
Validate Modulo 16
and Transmit
Validate Modulo 16, but
Don’t Transmit
A12D D34A
Codabar
Stop Start Stop Start
Character
On
* Off
Require