Datalogic Scanning POWERSCAN 7000 - Manual (Page 16)

Getting Started
1-8 PowerScan ® 7000 2D
USB HID
Scan the following code to program the imager for USB HID bar code
imagers. Scanning this code changes the terminal ID to 131.
USB COM Port Emulation
Scan the following code to program the imager to emulate a regular RS-
232-based COM port. If you are using a Microsoft
® Windows ® PC,
you will need to download a driver from the website listed on the back
cover of this manual. The driver will use the next available COM port
number. Apple
®
Macintosh computers recognize the imager as a USB
CDC class device and automatically use a class driver. Scanning the code
below changes the terminal ID to 130.
CTS/RTS Emulation
NOTE
No extra configuration (e.g., baud rate) is neces-
sary.
USB HID Bar Code imager
USB COM Port Emulation
On
* Off