Datalogic Scanning POWERSCAN 7000 - Manual (Page 56)

Data Editing
4-2 PowerScan ® 7000 2D
Points to Keep In Mind
• It is not necessary to build a message string. The selections in this
chapter are only used if you wish to alter the default settings.
Default prefix = None. Default suffix = None.
• A prefix or suffix may be added or cleared from one symbology or
all symbologies.
• You can add any prefix or suffix from the ASCII Conversion Chart
(Code Page 1252) on page A-4 , plus Code I.D. and AIM I.D.
• You can string together several entries for several symbologies at
one time.
• Enter prefixes and suffixes in the order in which you want them to
appear on the output.