Datalogic Scanning POWERSCAN 7000 - Manual (Page 88)

Symbologies
6-20 PowerScan ® 7000 2D
UPC-A Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-A data.
Default = Off for both 2 Digit and 5 Digit Addenda.
UPC-A Addenda Required
When Required is scanned, the imager will only read UPC-A bar codes
that have addenda. You must then turn on a 2 or 5 digit addenda listed
on
page 6-20 . Default = Not Required.
UPC-A Addenda Separator
When this feature is on, there is a space between the data from the bar
code and the data from the addenda. When turned off, there is no space.
Default = On.
* 5 Digit Addenda Off
5 Digit Addenda On
* 2 Digit Addenda Off
2 Digit Addenda On
* Not Required
Required
Off
* On