Datalogic Scanning POWERSCAN 7000 - Manual (Page 39)

Double Read Timeout
Product Reference Guide 3-9
Scan the Hands Free Time-Out bar code, then scan the time-out duration
(from 0-300,000 milliseconds) from the
Programming Chart on page B-5 ,
and Save. Default = 5,000 ms.
Double Read Timeout
This sets the time period before the imager can read the same bar code a
second time. Setting a reread delay protects against accidental rereads of
the same bar code. Longer delays are effective in minimizing accidental
rereads at POS (point of sale). Use shorter delays in applications where
repetitive bar code scanning is required. Default = Medium.
Reread Delay only works when in Presentation Mode (see Presentation
Mode on page 3-7 ).
User-Specified Double Read Timeout
If you want to set your own length for the reread delay, scan the bar code
below, then set the delay (from 0-30,000 milliseconds) by scanning dig-
its from the
Programming Chart on page B-5 , then scanning Save.
Hands Free Time-Out
Short (500 ms)
* Medium (750 ms)
Long (1000 ms)
Extra Long (2000 ms)
User-Specified Double Read Timeout