Marantz SR6006 - Manual (Page 119)

116
SYSTEM SETUP
Zone Setup
Default settings are underlined.
Set the audio to play back with multi-zone (ZONE2, ZONE3).
• “ZONE2” is displayed when “ZONE2” is selected with “Amp Assign” (
vpage 106 ).
• “ZONE3” is displayed when “ZONE3” is selected with “Amp Assign” ( vpage 106 ).
Setting items Setting details
Bass
Adjust low frequency range
(bass). –10dB – +10dB (0dB)
Treble
Adjust high frequency range
(treble). –10dB – +10dB (0dB)
HPF
Make settings for cutting
the low range to reduce
distortion in the bass. ON : The low range is attenuated.
OFF : The low range is not attenuated.
Lch Level
Adjust the left channel
output level. –12dB – +12dB (0dB)
The “Lch Level” can be set when “Channel“ ( vpage 116 ) is set to
“Stereo“.
Rch Level
Adjust the right channel
output level. –12dB – +12dB (0dB)
The “Rch Level” can be set when “Channel“ ( vpage 116 ) is set to
“Stereo“.
Channel
Set the signal output from
multi-zone. Stereo : Select stereo output.
Mono : Select mono output.
Setting items Setting details
Volume Level
Set the volume output level. Variable : Volume adjustment is enabled by main unit and remote control
unit.
–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by external
amplifier.
0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external
amplifier.
When “Amp Assign” ( vpage 106 ) is set to “ZONE2” or “ZONE3”,
the “Volume Level” setting is automatically set to “Variable”.
Volume Limit
Make a setting for
maximum volume. OFF : Do not set a maximum volume.
–20dB (61) / –10dB (71) / 0dB (81)
This is displayed from 0 to 99 when “Volume Display” ( vpage 117 )
is set to “Absolute”.
Power On Level
Define the volume setting
that is active when the
power is turned on. Last : Use the memorized setting from the last session.
– – – (0) : Always mute when power is turned on.
–80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
This is displayed from 0 to 99 when “Volume Display” ( vpage 117 )
is set to “Absolute”.
Mute Level
Set the amount of
attenuation when muting
is on. Full : The sound is muted entirely.
–40dB : The sound is attenuated by 40 dB down.
–20dB : The sound is attenuated by 20 dB down.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
BD