Marantz SR6006 - Manual (Page 65)

62
Connect
• For the method of connecting 7.1-channel system with surround back speakers, see C page 6
“Connecting the speakers” .
• For the method of connecting the TV, see C page 3 “Connect this unit to the television using an HDMI
cable (sold separately)” .
7.1-channel (Front height speaker) connection
The illustration on the right shows a connection example for performing 7.1-channel playback using the
front height speakers.
To perform 7.1-channel playback using the front height speakers, set “Amp Assign” to “F.Height” in
steps 3 and 4 for “Set up “Amp Assign”” (
vpage 69 ).
NOTE
• For speaker cable connections, see C page 6 “Connecting the speakers” .
• Connect so that the speaker cable core wires do not protrude from the speaker terminal. The
protection circuit may be activated if the core wires touch the rear panel or if the + and – sides
touch each other (
vpage 145 “Protection Circuit”).
• Never touch the speaker terminals while the power supply is connected. Doing so could result
in electric shock (When the Setup wizard is running, follow the instructions in the Setup wizard
screen for making connections.).
• Use speakers with the speaker impedances shown below.
Speaker terminals Speaker impedance
FRONT A
6 – 8 Ω
FRONT B
FRONT A + FRONT B
8 Ω
CENTER
6 – 8 Ω SURROUND
SURR. BACK / AMP ASSIGN
FL FR
C
SL SR
SW
FHR FHL
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion