Marantz SR6006 - Manual (Page 20)

17
Connecting a wireless receiver (RX101)
By connecting a wireless receiver RX101 (sold separately) to this unit, you can receive and playback audio
signals from other devices using the Bluetooth Communication Function.
• Use a Bluetooth device that is A2DP compatible (
vpage 143 “A2DP”).
• You can also use wireless receiver RX101 as an external IR receiver.
• For instructions on the wireless receiver settings, refer to the RX101’s operating instructions.
Wireless receiver RX101
Remote control unit
Bluetooth device
(A2DP Compatibility)
You can enjoy listening to music by connecting a wireless receiver via the M-XPort input connector. In this
case, set the input source to “M-XPort”.
NOTE
To use wireless receiver RX101 as external IR receiver, set the remote sensor function of this unit to
disable (
vpage 122 “Remote control settings”).
Connect a device that has a multichannel output
terminal
• You can connect this unit to an external device fitted with multi-channel sound audio output jacks to enjoy
music and video.
• The video signal can be connected in the same way as a Blu-ray Disc player / DVD player ( vpage 11
“Connecting a Blu-ray Disc player”).
Cables used for connections
Audio cable (sold separately)
Audio cable
R
L
R
L
Audio cable
L
L
R
R
L
L
R
R
L
L
R
R
SUB-
WOOFER
CENTER SURROUND
BACK
R L
SURROUND
R L
FRONT
R L
AUDIO
Blu-ray Disc player / DVD player /
External decoder
To play analog signals input from 7.1CH IN connectors, set “Input Mode” ( vpage 96 ) to “7.1CH
IN”.
in Set as Necessary
When a device is connected to the SBL/SBR terminal of 7.1CH IN connectors, set “Amp Assign”
(
vpage 106 ) to “NORMAL”.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion