Marantz SR6006 - Manual (Page 128)

125
Check the registered preset code
1 Press and hold down the input
source select buttons for the
appliance to control, and press
SET until the SEND indicator
blinks.
2
Press SEARCH/INFO .
The SEND indicator blinks twice.
3 To view the code for first digit,
press 1 .
Count the number of times the SEND
indicator blinks (e.g. 3 blinks = 3) and
write down the number.
• If a code digit is “0”, the SEND indicator
does not blink.
4
Then press 2 to check the second
digit of the code. Now press 3 and
4 to check the third and fourth
digits of the code.
Registering preset codes
Default settings for preset codes
The devices shown below are registered for each input source button
as default. Settings can be changed according to the devices to be
used.
1 Press and hold down the input
source select buttons for the
appliance to control, and press
SET until the SEND indicator
blinks twice.
2 Enter the appropriate preset
code (4 digits) from the table
below.
The SEND indicator blinks twice.
Input source
select
buttons
Category Brand
Preset
code
Blu-ray Disc player marantz 5000
DVD player marantz 2000
Television marantz 1000
Satellite set top box marantz 4000
NOTE
After this procedure, the selected source reset to its initial code.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion