Marantz SR6006 - Manual (Page 152)

149
Symptom Cause/Solution Page
Cannot compile
Playlist. • This unit does not respond to playlist compilation. When the
playlist is compiled in PC Application, it is registered to “My
Library”. In this way, the playlist can be played in this unit
–
Cannot delete
Rhapsody Channel
registered in “My
Channels”. • Cannot be done with this unit. Delete from PC Application. –
Cannot delete
Tracks, Playlists,
Channels registered
in “My Library” • Cannot be done with this unit. Delete from PC Application. –
Cannot login to
Napster. (“Incorrect
Username or
Password” is
displayed.) • Login information is incorrect. Check if the Username for Napster
has been properly entered. Re-enter the Password. (Password is
not displayed.)
http://www.napster.com/choose/index_default.html
47 , 115
Cannot login to
Pandora. (“Email
address” or
“Password” is
displayed.) • Login information is incorrect. Check if the “Email address” for
Pandora has been properly entered. Re-enter the “Password”.
(Password is not displayed.)
http://www.pandora.com/marantz
49
GAirPlayH
Symptom Cause/Solution Page
The AirPlay icon
is not displayed
in iTunes or on the
iPhone/iPod touch/
iPad.
• This unit and the computer or iPhone/iPod touch/iPad are not
connected to the same network (LAN). Connect the computer or
iPhone/iPod touch/iPad to the same network as this unit.
• iTunes or the iPhone/iPod touch/iPad do not have firmware that
supports AirPlay installed. Update to the latest firmware.
19
119
No sound. • The volume in iTunes or on the iPhone/iPod touch/iPad is set to
the minimum setting. Adjust the volume to the optimum level.
• This unit is not selected in the screen that is displayed when
iTunes or the iPhone/iPod touch/iPad is started. Start iTunes or
switch on the iPhone/iPod touch/iPad, click the AirPlay icon
in
the displayed screen, and select this unit.
–
76
GM-XPortH
Symptom Cause/Solution Page
Audio is not output
when a wireless
receiver (RX101 is
connected). • Check that the Bluetooth device and Wireless receiver (RX101)
are correctly paired.
17 , 145
GRemote Control UnitH
Symptom Cause/Solution Page
The set cannot be
operated with the
remote control unit. • Batteries are worn out. Replace with new batteries.
• Operate the remote control unit within a distance of about
23 ft/7 m from this unit and at an angle of within 30°.
• Remove any obstacle between this unit and the remote control
unit.
• Insert the batteries in the proper direction, checking the q and
w marks.
• The set’s remote control sensor is exposed to strong light (direct
sunlight, inverter type fluorescent bulb light, etc.). Move the set
to a place in which the remote control sensor will not be exposed
to strong light.
• The operation mode does not match the settings of the device to
operate. Check the operation mode.
135
135
135
135
135
123
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Inf
or
mation