Marantz SR6006 - Manual (Page 31)

28
n Using the “SOURCE SELECT” menu
BD
Recent
Player
Video
Network
Tuner
SOURCE SELECT
Source
The currently selected input
source is highlighted.
q
w
e
q Input Source
The name of the highlighted input source is displayed.
w Recently used sources
The recently used input sources (up to five) are displayed.
e Icons for the input sources in the different categories are
displayed.
q Press 3 .
Display the “SOURCE SELECT” menu.
w Use uio p to select the input source,
then press ENTER .
The input source is set and the source
selection menu is turned off.
• When using with an iPod connected directly to the USB port of this
unit, select “ (iPod/USB)” for the input source.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” ( vpage 117 ).
• To turn off the source selection menu without selecting an input
source, press 3 again.
• When 3 is pressed, the AMP-operation mode starts automatically
( vpage 123 ).
Adjusting the master volume
Use VOLUME + , – to adjust the
volume.
n When the “Volume Display” setting
( vpage 117 ) is “Relative”
GAdjustable rangeH
– – – –80.5dB – 18.0dB
n When the “Volume Display” setting ( vpage 117 ) is
“Absolute”
GAdjustable rangeH 0.0 – 99.0
• The variable range differs according to the input signal and channel
level setting.
You can also operate via the main unit. In this case, perform the
following operations.
Turn
VOLUME to adjust the volume.
Turning off the sound temporarily
Press MUTE .
• “MUTE” appears on the display.
•
appears on a TV screen.
• The sound is reduced to the level set at “Mute Level” ( vpage 117 ).
• To cancel, press MUTE again. Muting can also be canceled by
adjusting the master volume.
Set the front speakers to be used
Press SPEAKER A/B .
• Each time you press SPEAKER A/B ,
the front speaker setting will change as
follows.
Front A Front A+B Front B
Important information
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion
BD