Marantz SR6006 - Manual (Page 124)

121
INFORMATION
Show information about receiver settings, input signals, etc.
Items Setting details
Status
Show information about
current settings. n MAIN ZONE
This item shows information about settings for MAIN ZONE.
The information displayed differs according to the input source.
Select Source / Name / Surround Mode / Input Mode /
Decode Mode / Assign / Video Select / Video Mode /
Content Type etc.
n ZONE2/3
This item shows information about settings for ZONE2 or ZONE3.
Power / Select Source / Volume Level
Audio Input Signal
Show information about
audio input signals. Surround Mode : The currently set surround mode.
Signal : The input signal type.
fs : The input signal’s sampling frequency.
Format : The number of channels in the input signal (front, surround, LFE).
Offset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround back
channel. “MATRIX” is displayed with Dolby Digital EX and DTS-ES Matrix
signals, “DISCRETE” with DTS-ES Discrete signals.
Dialogue normalization function
This function is automatically activated when
playing Dolby Digital sources.
It automatically corrects the standard signal
level for individual program sources.
The correction value can be checked using the
STATUS on the main unit.
The figure is the corrected value. This cannot be changed.
HDMI Information
Show information about
HDMI input/output signals
and monitor. Signal Information
• Resolution / Color Space / Pixel Depth
Monitor 1 / Monitor 2
• Interface / Supported Resolution
Items Setting details
Preset Channel
Show information about
preset channels.
HD Radio NET/USB
Preset 1 – 3
A1 – G8
“Preset 1 – 3” is displayed when the input source is “NET/USB”.
Even if STATUS OSD is pressed, the Information screen (Status, Audio Signal,
HDMI Information) can be displayed.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
BD