Video signal resolution conversion table – Marantz SR6006 User Manual

Page 145

Advertising
background image

142

Video signal resolution conversion table

When “Video Convert” (

vpage 95

) is set to “ON”, “i/p Scaler” (

vpage 95

) is set to “Analog”, “Analog & HDMI” or “HDMI” are set, the resolution of the input video signal can be converted to a different

resolution for output (

vpage 5

“Converting input video signals for output (Video conversion function)”).

The relationship between the resolution of the convertible video signal and HDMI output resolution is shown in the table below.

HDMI Output

Output resolution

Input resolution

480i/576iz1

480p/576p

1080i

720p

1080p

1080p 24Hz

Video Input

NTSC/NTSC4.43/PAL-M/PAL-60

S (480i)

S (480p)

S

S

S

S

PAL/PAL-N/SECAM

S (576i)

S (576p)

S

S

S

Component video input

480i

S (480i)

S (480p)

S

S

S

S

480p

S (480p)

S

S

S

S

1080i 60Hz

S

S

S

S

720p 60Hz

S

S

S

S

1080p 60Hz

S

S

HDMI Input

480i

S (480i)

S (480p)

S

S

S

S

480p

S (480p)

S

S

S

S

1080i 60Hz

S

S

S

S

720p 60Hz

S

S

S

S

1080p 24Hz

Sz2

Sz3

1080p 60Hz

S

S

S The resolution set in “Resolution” (

vpage 95

) in the menu is output.

( )

The resolution inside ( ) is output.

Output at the same resolution as the input video signal resolution.

z1 Only output when “i/p Scaler” in the menu is set to “OFF”.
z2 The resolution set in “Resolution” (

vpage 95

) in the menu is set to “Auto”, and a television that does not support 1080p 24Hz video signals is connected.

z3 The resolution set in “Resolution” (

vpage 95

) in the menu is set to “Auto”, and a television that supports 1080p 24Hz video signals is connected.

NOTE

• Video/component video output is output at the same resolution as the input video signal resolution.
• The 3D, Computer resolution, “x.v.Color”, sYCC601 color, Adobe RGB color or Adobe YCC601 color input to HDMI is output at the same resolution as the input video signal.
• When “Video Mode” in the menu is set to “Game” or “Auto” and game contents are played, the same resolution as the input video signal is output.
• When “Resolution” in the menu is set to “Auto”, the number of pixels in the television panel connected to the HDMI output connector is automatically detected, and the optimum resolution is output according to

the table above.

Relationship between video signals and monitor output

Basic v

ersion

A

dv

anced v

ersion

Inf
or

mation

Inf
or

mation

Advertising
This manual is related to the following products: