Marantz SR6006 - Manual (Page 18)

15
Connecting an HD Radio receiver
• By connecting a HD Radio antenna to this unit, you can receive
HD Radio programs.
• HD Radio broadcasting currentry is available in the United States and
select other countries.
w e q
FM outdoor
antenna
Direction of broadcasting station
75 Ω coaxial
cable
Ground
AM outdoor
antenna
AM loop antenna (for HD Radio
broadcasting, supplied)
• To prevent interference, install
at least 3.3 ft/1 m away from
the antenna connected to the
this unit’s other AM tuner
terminal.
Black
White
FM indoor antenna
(for HD Radio
broadcasting,
supplied)
n AM loop antenna assembly
1 Put the stand section
through the bottom of the
loop antenna from the
rear and bend it forward.
Stand
Square
hole
Projecting
part
Loop
antenna
2 Insert the projecting part
into the square hole in
the stand.
n Using the AM loop antenna
Suspending on a wall
Suspend directly on a wall without assembling.
Nail, tack, etc.
Standing alone
Use the procedure shown above to assemble.
NOTE
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM
loop antenna.
• Make sure the AM loop antenna lead terminals do not touch metal
parts of the panel.
• If the signal has noise interference, connect the ground terminal
(GND) to reduce noise.
• If you are unable to receive a good broadcast signal, we recommend
installing an outdoor antenna. For details, inquire at the retail store
where you purchased the unit.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion