Connecting to a home network (lan), Required system – Marantz SR6006 User Manual

Page 22

Advertising
background image

19

Connecting to a home network (LAN)

• This unit lets you play via your home network (LAN) music files

stored on a computer and music content such as that from Internet
radio.
You can also operate this unit from a computer using the Web
control function.

• You can update by downloading the latest firmware from the

marantz website.
For more information, on the menu, select “Firmware Update”
(

vpage 119

).

See “Network Setup” on the menu (

vpage  112

) for more

information on network setting.

Cables used for connections

Cable (sold separately)

Ethernet
cable

Internet

To WAN side

Router

To LAN port

To LAN port

LAN port/

Ethernet

connector

Computer

Modem

For connections to the Internet, contact an ISP (Internet
Service Provider) or a computer shop.

Required system

n Broadband internet connection

n Modem

Device that connects to the broadband circuit and conducts

communications on the Internet.
A type that is integrated with a router is also available.

n Router

When using this unit, we recommend you use a router equipped
with the following functions:
• Built-in DHCP server

This function automatically assigns IP addresses on the LAN.

• Built-in 100BASE-TX switch

When connecting multiple devices, we recommend a switching
hub with a speed of 100 Mbps or greater.

n Ethernet cable (CAT-5 or greater recommended)

• Use only a shielded STP or ScTP LAN cable which is available at

retailer.

• Some flat type Ethernet cables are easily affected by noise.

We recommend using a normal type cable.

• If you have an Internet provider contract for a line on which network

settings are made manually, make the settings at “Network Setup”
(

vpage 112

).

• With this unit, it is possible to use the DHCP and Auto IP functions

to make the network settings automatically.

• When using this unit with the broadband router’s DHCP function

enabled, this unit automatically performs the IP address setting and
other settings.
When using this unit connected to a network with no DHCP
function, make the settings for the IP address, etc., at “Network
Setup” (

vpage 112

).

• When setting manually, check the setting contents with the network

administrator.

NOTE

• A contract with an ISP is required to connect to the Internet.

No additional contract is needed if you already have a broadband
connection to the Internet.

• The types of routers that can be used depend on the ISP. Contact an

ISP or a computer shop for details.

• marantz assumes no responsibility whatsoever for any

communication errors or troubles resulting from customer’s
network environment or connected devices.

• This unit is not compatible with PPPoE. A PPPoE-compatible router

is required if you have a contract for a type of line set by PPPoE.

• Do not connect an NETWORK connector directly to the LAN port/

Ethernet connector on your computer.

• To listen to audio streaming, use a router that supports audio

streaming.

Basic v

ersion

A

dv

anced v

ersion

Inf
or

mation

Basic v

ersion

Advertising
This manual is related to the following products: