Marantz SR6006 - Manual (Page 153)

150
Resetting the microprocessor
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
ON/STANDBY
DISPLAY
ZONE SELECT
1
Turn off the power using ON/STANDBY .
2
Press ON/STANDBY while simultaneously pressing ZONE SELECT and DISPLAY .
3 Once the display starts flashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Inf
or
mation