Measurement Computing USB-2527 - Manual (Page 9)

USB-2527 User's Guide Installing the USB-2527
9
PS-9V1AEPS-2500 power supply
Cables
CA-68-3R CA-68-3S (3-feet)
CA-68-6S (6-feet)
C40FF-x
Signal conditioning accessories
MCC provides signal termination products for use with the USB-2527. Refer to the " Field wiring and signal
termination " section for a complete list of compatible accessory products.
Additional documentation
In addition to this hardware user's guide, you should also receive the Quick Start Guide (available in PDF at
www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf). This booklet supplies a brief description of
the software you received with your USB-2527 and information regarding installation of that software. Please
read this booklet completely before installing any software or hardware.
Unpacking the USB-2527
As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the USB-2527 from its packaging, ground yourself using a wrist strap or by simply
touching the computer chassis or other grounded object to eliminate any stored static charge.
If any components are missing or damaged, notify Measurement Computing Corporation immediately by
phone, fax, or e-mail:
 Phone: 508-946-5100 and follow the instructions for reaching Tech Support.
 Fax: 508-946-9500 to the attention of Tech Support
 Email: [email protected]
Installing the software
Refer to the Quick Start Guide for instructions on installing the software on the Measurement Computing Data
Acquisition Software CD. This booklet is available in PDF at
www.mccdaq.com/PDFmanuals/DAQ-Software-
Quick-Start.pdf .
We recommend that you download the latest Windows Update onto your computer before installing and
operating the USB-2527.