NavCom SF-2050 Rev.G - Manual (Page 53)

SF-2050 User Guide – Rev. G
Take care not to kink, stretch, distort, or
damage the antenna cable. Do not place
the cable adjacent to cables carrying
electrical power or radio frequencies. In
these instances, attempt to cross cables
at 90º angles in an effort to reduce cross-
coupling of RF signals.
Where the GPS antenna is exposed to
sources of electromagnetic discharge
such as lightning, install a properly
grounded in-line electrical surge
suppressor between the GPS sensor and
antenna. Install protective devices in
compliance with local regulatory codes
and practices. Protective devices must
pass DC power from the receiver to the
antenna.
3-51