Factory default settings, Figure 15: starutil nmea message list – NavCom SF-2050 Rev.G User Manual
Page 56
Advertising
SF-2050 User Guide – Rev. G
Factory Default Settings
COM1
9 Configuration - Data port
9 Rate – 19.2Kbps
9 Output of NMEA messages GGA & VTG
scheduled @ 1Hz rate
Though the output rate defaults to
1Hz, the data output rate can be
changed to On Change. Making this
selection in the NMEA output list will
better reflect the navigation rate
selected in the Rover Setup screen.
Figure 15: StarUtil NMEA Message List
4-54
Advertising
This manual is related to the following products: