Teac MX-View Version 1.0b1 - Manual (Page 32)

32
only used when playing a selection using the Play In to Out command with Post-Roll
checked in the Transport window.
Q
K Enable/Disable Pre and Post roll: Ctrl + K on Microsoft Windows, Cmd + K on
Macintosh

Note: This feature is separate from the Pre/Post-roll menus 212 and 213, as set from the MX-
2424’s front panel. Menu 212 and 213 Pre/Post-rolls are applied only to a Loop or audition play
modes. The Pre-roll and Post-roll lengths in the Transport window do not affect the functions of the
MX-2424 front panel transport buttons and can be used with commands such as play and “In to
Out” play.
5-9 Return After Play
Selecting Return After Play under the Playback Menu causes the playhead to return to its
previous start point after the transport is stopped.
5-10 Return View To Playhead
This feature, located in the View Menu
→ → → → Return View To Playhead, will return the
View to the playhead. This feature is particularly useful whenever the transport is in
motion and the playhead is out of view.
Q
K Return View to Playhead: Ctrl + P on Microsoft Windows, Cmd + P on Macintosh
5-11 Reverse Play
Reverse Play sets the transport into backwards, or “reverse” play, such that the playhead
is moving to the left of the screen at normal play speed. To initiate a reverse play, click
on the reverse play button in the Transport window.
Locating Around a Project
MX-View allows you to locate around a project with ease. The following location tools are available.
5-12 Using the Playhead Counter
The playhead position counter, located in the upper left of Transport window, allows you
to enter and locate to a desired playhead location. Simply enter the location, as described
in section 4-8 (Register Entry)
, and press Enter.
5-13 Fast Forward and Rewind
Fast Forward and Rewind work just like on a regular tape machine, including ramp-up
and ramp-down. You can access the Fast Forward and Rewind buttons via the Transport
window or via short cut quick keys.
Q
K Fast Forward: Ctrl + . (period) on Microsoft Windows, Cmd + . (period) on Macintosh.
Q
K Rewind: Ctrl + , (comma) on Microsoft Windows, Cmd + , (comma) on Macintosh.
Rewind Fast Forward