Teac MX-View Version 1.0b1 - Manual (Page 73)

73
After a Smart Copy is initiated, a progress percentage will appear at the bottom of the
Project/Track window. Upon completion of the task, a pop-up message will appear and a
check will be placed next to the operation. Note that once you click on the completed
operation, it will disappear from the list.
Tape Mode Convert:
To perform a Tape Mode convert, select the desired project and choose Project/Track
window
→ → → →File Menu → → → → Tape Mode Convert. A window will appear, prompting you to
choose a destination device (SCSI disk ID).
As with a Smart Copy, a progress percentage will appear at the bottom, along with an
Abort button. Pressing the Abort button will prompt you to verify the operation before
proceeding.
Clicking on the check will
remove the message from
the window.
Abort button
Type of operation
in progress
Percentage complete