Teac MX-View Version 1.0b1 - Manual (Page 69)

69
Chapter 8: Advanced Operations
Chapter 8 takes an in-depth look at Groups, Location Markers, and Level Meters, as well as Mute and
Volume Automation.
8-1 Using Groups ( N/A )
This feature will be available in a future upgrade.
8-2 Using Location Markers
Note: Location Markers Window will be available in a future upgrade. This window will
allow naming, deleting, and moving of location markers. The following Quick keys can
be used in the interim:
Q
K Create New Marker:
Return Key on both Microsoft Windows and Macintosh
Q
K Create a number specific Marker:
C followed by two numbers specifying a particular memory register on both Microsoft
Windows and Macintosh
Q
K Locate to a Specific Marker:
V followed by two numbers specifying a particular memory register on both Microsoft
Windows and Macintosh
8-3 Level Meters
The Meters window displays 24 meters indicating the amplitude of audio level, much like
on the MX-2424 front panel.
Under the File menu of the Meters window, you can configure the Meter windows height
and width.
Note that in 2 x sample rates (88.1-96kHz) only 12 meters will appear for each MX-2424.
Signal Present
(-60 db)
Signal Clip (0 dB)
Peak hold
Signal Level