Teo E911 Response System Installation - Manual (Page 28)

Teo E911 Response Server 9145 Installation Instructions
Page 28 13-280133 Rev. C
P P o o w w e e r r
The 9145 is equipped with two redundant power supplies.
Connect the power connectors on the back panel to standard 120 VAC, 60 Hz power outlets
using the supplied IEC power cords.
If multiple circuits are available at the equipment site, connect each power cord to a
separate power circuit to ensure that the server will continue to operate if one circuit fails.
Your system is configured in the computer BIOS to automatically start when power is
connected. This setting ensures that the 9145 will restart in the event of a temporary loss of
power.
To manually turn the 9145 off or on, press the power button (page 9).