Call masking tab – Teo E911 Response System Installation User Manual
Page 42
Teo E911 Response Server 9145 Installation Instructions
Page 42
13-280133 Rev. C
C
C
a
a
l
l
l
l
M
M
a
a
s
s
k
k
i
i
n
n
g
g
T
T
a
a
b
b
Call masking is used to replace your caller ID on “non-911” outbound calls. Sensitive areas
such as a school class room may want to block or “mask” their telephone number from
appearing for caller ID. A front desk administration telephone number or a pilot number
may be substituted for your caller ID when an outside call is placed.
If you want call masking, then check Replace Non-E911 Calling party Number.
Enter up to 255 telephone numbers in the table.
Each Non-E911 Call Mask Group is assigned a ten digit number.
When the station number data is entered later on, each station will be assigned a group
number.
If station 1037 is assigned group 2, then when station 1037 places a non-911 call, the
number that will be sent for caller ID is 8885551234 as shown in the table above.