Network port configuration, Network port configuration -5 – Verilink QPRI 2921 (880-503143-001) Product Manual User Manual
Page 21
Quick Set-Up
Verilink QPRI 2921
2-5
Network Port Configuration
1. From the NCM ASCII interface Main Menu,
, select
the QPRI application module using option S, Shelf/Slot. When
refreshed, the Main Menu will use brackets to enclose the P,
which indicates the QPRI.
2. From the Main Menu, select option C, “Configuration”, to start
the configuration task.
Figure 2-3 Configuration Menu
3. From the Configuration Menu,
, select option P to
access the network port configuration menu,
Figure 2-4 T1 Port Configuration Menu
4. In the T1 Port Configuration Menu, press the letter I, then the
numeral 1, E
NTER
, then Y, to place Net Port 1 In Service. Press
the I, then 2, E
NTER
, then Y, to place Net Port 2 In Service.
5. Press F, then 1, E
NTER
, then 2 to select ESF as your frame format
for Net Port 1. Press F, then 2, E
NTER
, then 2 to select ESF as the
frame format for Net Port 2.
6. Press L, then 1, E
NTER
, then 2 to select B8ZS as the line coding
for Net Port 1. Press L, then 2, E
NTER
, then 2 to select B8ZS as
the line coding for Net Port 2.
A [127.255.255.0] [0,11] QPRI > x
A [127.255.255.0] [0,11] QPRI > x
A [127.255.255.0] [0,11] QPRI > x
A [127.255.255.0] [0,11] QPRI > x
-- QPRI CONFIGURATION MENU --
-- QPRI CONFIGURATION MENU --
-- QPRI CONFIGURATION MENU --
-- QPRI CONFIGURATION MENU --
P) T1 port I) ISDN PRI
P) T1 port I) ISDN PRI
P) T1 port I) ISDN PRI
P) T1 port I) ISDN PRI
X) Exit this screen
X) Exit this screen
X) Exit this screen
X) Exit this screen
-- QPRI T1 PORT CONFIGURATION MENU --
-- QPRI T1 PORT CONFIGURATION MENU --
-- QPRI T1 PORT CONFIGURATION MENU --
-- QPRI T1 PORT CONFIGURATION MENU --
PORT 1 PORT 2 PORT 3 PORT 4
PORT 1 PORT 2 PORT 3 PORT 4
PORT 1 PORT 2 PORT 3 PORT 4
PORT 1 PORT 2 PORT 3 PORT 4
In) In Service YES YES YES YES
In) In Service YES YES YES YES
In) In Service YES YES YES YES
In) In Service YES YES YES YES
Fn) Frame Format ESF ESF ESF ESF
Fn) Frame Format ESF ESF ESF ESF
Fn) Frame Format ESF ESF ESF ESF
Fn) Frame Format ESF ESF ESF ESF
Ln) Line Coding B8ZS B8ZS B8ZS B8ZS
Ln) Line Coding B8ZS B8ZS B8ZS B8ZS
Ln) Line Coding B8ZS B8ZS B8ZS B8ZS
Ln) Line Coding B8ZS B8ZS B8ZS B8ZS
Bn) Line Build Out -15db -15db 0-133ft 0-133ft
Bn) Line Build Out -15db -15db 0-133ft 0-133ft
Bn) Line Build Out -15db -15db 0-133ft 0-133ft
Bn) Line Build Out -15db -15db 0-133ft 0-133ft
NDn) Network Density 12.5% 80s 12.5% 80s 12.5% 80s 12.5% 80s
NDn) Network Density 12.5% 80s 12.5% 80s 12.5% 80s 12.5% 80s
NDn) Network Density 12.5% 80s 12.5% 80s 12.5% 80s 12.5% 80s
NDn) Network Density 12.5% 80s 12.5% 80s 12.5% 80s 12.5% 80s
NLn) Network Initiated Loop YES NO NO NO
NLn) Network Initiated Loop YES NO NO NO
NLn) Network Initiated Loop YES NO NO NO
NLn) Network Initiated Loop YES NO NO NO
An) Alarm Declare Time(sec) 0 0 0 0
An) Alarm Declare Time(sec) 0 0 0 0
An) Alarm Declare Time(sec) 0 0 0 0
An) Alarm Declare Time(sec) 0 0 0 0
DLn) FDL Enable YES YES YES YES
DLn) FDL Enable YES YES YES YES
DLn) FDL Enable YES YES YES YES
DLn) FDL Enable YES YES YES YES
PRM Enable NO NO NO NO
PRM Enable NO NO NO NO
PRM Enable NO NO NO NO
PRM Enable NO NO NO NO
En) Enable ISDN Disabled Disabled N/A N/A
En) Enable ISDN Disabled Disabled N/A N/A
En) Enable ISDN Disabled Disabled N/A N/A
En) Enable ISDN Disabled Disabled N/A N/A
F) FDL configuration
F) FDL configuration
F) FDL configuration
F) FDL configuration
C) Copy port T) Timing
C) Copy port T) Timing
C) Copy port T) Timing
C) Copy port T) Timing
X) Exit this screen
X) Exit this screen
X) Exit this screen
X) Exit this screen