Verilink QPRI 2921 (880-503143-001) Product Manual - Manual (Page 32)

Quick Set-Up
2-16 Verilink QPRI 2921
• Port providing backup is the Source port of the primary
circuit.
• Circuit type is “Primary” for the main circuit and “Dial Bkup”
for the ISDN dial backup circuit. Use “Switched” to manually
activate the T1 or ISDN circuit.
• Set the Call Reference Value to the Call Profile Number defined
before (the Call Reference Number is the Call Profile Number).
Activate the
Primary Circuit
• Activate the primary circuit from the Circuit Manager menu
by selecting I.
• Create an error to test the dial backup circuit or set a test call
interval from the PRI Modify Call Profile Menu accessed by
selecting M from within the Port PRI Call Profile
Configuration Menu.