Verilink QPRI 2921 (880-503143-001) Product Manual - Manual (Page 23)

Quick Set-Up
Verilink QPRI 2921 2-7
For each port:
2. Press S, then the port number, E NTER , to assign the FDL
Standard to the port.
Options available for the FDL Standard are TR54016, T1.403,
or BOTH. This option determines how the network service
provider examines and resets the ESF registers. Select the
TR54016 option if your service provider is AT&T. Select
T1.403 if your service provider is any other provider.
3. Press M, then the port number to show options for the FDL
Mode. Currently, TERM is the only one supported. PASS is NOT
supported.
4. Press P, then the port number to show options for the Poll
Mode. Your options are POLL, NO POLL, and UNSOLICT. The
above display shows that NO POLL has been selected.
5. Press C, then the port number to show options for the PRM C/R
bit. Your options are NONE, USER, and TELCO.
6. Press I, then the port number to show options for the Idle
Pattern. Options for this parameter are ALL ONES or FLAGS.
The above display shows the FLAGS option.
7. Press A, then the port number for the prompt whether you
want to send/receive ANSI BOP LLB.
8. Press B, then the port number for the prompt whether you
want to send/receive ANSI BOP PLB.
Timing Options 1. When the FDL options have been selected, return to the
Configuration Menu and then select T for the Configuration
Menu (Timing Options) submenu.
Figure 2-6 Configuration Menu (Timing Options)
2. All primary and dial-backup circuits must use shelf timing to
synchronize with each other; therefore, select R, then YES,
then refresh the screen by exiting to the T1 Port
Configuration Menu and then returning to the screen by
A [127.255.255.0] [0,11] QPRI > t A [127.255.255.0] [0,11] QPRI > t A [127.255.255.0] [0,11] QPRI > t A [127.255.255.0] [0,11] QPRI > t
-- QPRI CONFIGURATION MENU (TIMING OPTIONS)--
-- QPRI CONFIGURATION MENU (TIMING OPTIONS)-- -- QPRI CONFIGURATION MENU (TIMING OPTIONS)-- -- QPRI CONFIGURATION MENU (TIMING OPTIONS)--
Current shelf timing source: Card 11, INTERNAL (TERTIARY)
Current shelf timing source: Card 11, INTERNAL (TERTIARY) Current shelf timing source: Card 11, INTERNAL (TERTIARY) Current shelf timing source: Card 11, INTERNAL (TERTIARY)
Source Slot Number Synchronization Auto Restore
Source Slot Number Synchronization Auto Restore Source Slot Number Synchronization Auto Restore Source Slot Number Synchronization Auto Restore
PRIMARY PC) 11 PS) INTERNAL PA) NO
PRIMARY PC) 11 PS) INTERNAL PA) NO PRIMARY PC) 11 PS) INTERNAL PA) NO PRIMARY PC) 11 PS) INTERNAL PA) NO
SECONDARY SC) 11 SS) INTERNAL SA) NO
SECONDARY SC) 11 SS) INTERNAL SA) NO SECONDARY SC) 11 SS) INTERNAL SA) NO SECONDARY SC) 11 SS) INTERNAL SA) NO
TERTIARY TC) 11 TS) INTERNAL TA) NO
TERTIARY TC) 11 TS) INTERNAL TA) NO TERTIARY TC) 11 TS) INTERNAL TA) NO TERTIARY TC) 11 TS) INTERNAL TA) NO
R) Receive clock from shelf: YES
R) Receive clock from shelf: YES R) Receive clock from shelf: YES R) Receive clock from shelf: YES
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
A [127.255.255.0] [0,11] QPRI >
A [127.255.255.0] [0,11] QPRI > A [127.255.255.0] [0,11] QPRI > A [127.255.255.0] [0,11] QPRI >