Verilink QPRI 2921 (880-503143-001) Product Manual - Manual (Page 70)

Configuring the QPRI 2921 Via the NCM 2000 Craft Interface
3-36 Verilink QPRI 2921
Search Circuit
Submenu
Use this option to search for or list existing circuits.
Figure 3-28 Search Circuit Submenu (Circ List Menu)
Table 3-23
Search Circuit Submenu (Circ List Menu) Commands
Delete Circuit
Submenu
Use this option to remove existing circuits.
Figure 3-29 Delete Circuit Submenu (Circ Deletion Menu)
Table 3-24 Delete Circuit Submenu (Circ Deletion Menu) Commands
Command Description Options
C Search by shelf, slot—Shelf and slot must be specified. Slots must be specified
in the range of 1through 13. If return is pressed, the screen will display (list)
the current circuits and their status.
Shelf, slot
(range 1—13)
P Search by port—Specify Circuit Port shelf, slot. Slots must be specified in the
range of 1through 13. If return is pressed, the screen will display (list) the
current circuits and their status.
Shelf, slot
(range 1—13)
X exit—exits this screen and returns to the Circuit Manager Menu, Figure 3-25,
Table 3-21.
A [127.255.255.0] [1,2] QPRI > l A [127.255.255.0] [1,2] QPRI > l A [127.255.255.0] [1,2] QPRI > l A [127.255.255.0] [1,2] QPRI > l
Circ List Menu -- [1,1] NCM 2000 Firmware 4.15 --
Circ List Menu -- [1,1] NCM 2000 Firmware 4.15 -- Circ List Menu -- [1,1] NCM 2000 Firmware 4.15 -- Circ List Menu -- [1,1] NCM 2000 Firmware 4.15 --
C) search by shelf,slot
C) search by shelf,slot C) search by shelf,slot C) search by shelf,slot
P) search by port.
P) search by port. P) search by port. P) search by port.
X) exit
X) exit X) exit X) exit
A [127.255.255.0] [1,2] QPRI >
A [127.255.255.0] [1,2] QPRI > A [127.255.255.0] [1,2] QPRI > A [127.255.255.0] [1,2] QPRI >
Command Description Options
S Single circuit—Use the Circuit ID to specify the circuit to delete:
12 characters maximum.
Circuit ID: 12
characters
maximum
A All circuits—Screen will prompt with the warning: Are You Sure? (Y/N) Yes or No
(Y/N)
C Card circuits—Specify the Shelf/Slot. Slots must be specified in the
range of 1 through 13.
Shelf, Slot
(Range of 1—13)
P Port circuits—Select the Circuit Ports by shelf/slot number. Slots must
be in the range of 1 through 13.
Shelf, Slot
(Range of 1—13)
X exit—Exits the Delete Circuit Submenu and returns you to the Circuit
Manager Menu, Figure 3-25, Table 3-21.
A [127.255.255.0] [1,2] QPRI > d A [127.255.255.0] [1,2] QPRI > d A [127.255.255.0] [1,2] QPRI > d A [127.255.255.0] [1,2] QPRI > d
Circ Deletion Menu -- [1,1] NCM 2000 Firmware 4.15 --
Circ Deletion Menu -- [1,1] NCM 2000 Firmware 4.15 -- Circ Deletion Menu -- [1,1] NCM 2000 Firmware 4.15 -- Circ Deletion Menu -- [1,1] NCM 2000 Firmware 4.15 --
S) single circuit
S) single circuit S) single circuit S) single circuit
A) all circuits
A) all circuits A) all circuits A) all circuits
C) card circuits
C) card circuits C) card circuits C) card circuits
P) port circuits
P) port circuits P) port circuits P) port circuits
X) exit
X) exit X) exit X) exit
A [127.255.255.0] [1,2] QPRI >
A [127.255.255.0] [1,2] QPRI > A [127.255.255.0] [1,2] QPRI > A [127.255.255.0] [1,2] QPRI >