Verilink QPRI 2921 (880-503143-001) Product Manual - Manual (Page 22)

Quick Set-Up
2-6 Verilink QPRI 2921
7. Press B, then 1, E NTER , then 1 to select 0db as the line build out
for Net Port 1. Press B, then 2, E NTER , then 1 to select 0db as the
line build out for Net Port 2.
8. Press ND, then 1, E NTER , then 1 to select NONE as the network
density for Net Port 1. Press ND, then 2, E NTER , then 1 to select
NONE as the network density for Net Port 2.
9. Press NL, then 1, E NTER , then Y to allow network initiated loops
on Net Port 1. Press NL, then 2, E NTER , then Y to allow network
initiated loops on Net Port 2.
10. Press A, then 1, E NTER , then 0 if you do not want the alarm
declare time enabled on Net Port 1. Type a number 1 through
127 to indicate the number of seconds to elapse before
declaring an alarm condition to the system for Net Port 1.
Press A, then 2, E
NTER , then 0 if you do not want the alarm
declare time enabled on Net Port 2. Type a number 1 through
127 to indicate the number of seconds to elapse before
declaring an alarm condition to the system for Net Port 2.
11. Press DL, then 1, E NTER , then Y to enable FDL for Net Port 1.
Press DL, then 2, E NTER , then Y to enable FDL for Net Port 2.
12. Press S, then 1, E NTER , then the number 24 to set the signalling
channel timeslot for Net Port 1. Press S, then 2, E NTER , then the
number 24 to set the signalling channel timeslot for Net Port 2.
13. Press E, then 1, E NTER , then 1 to enable the inband for Net Port
1. Press E, then 2, E NTER , then 2 to enable ISDN for Net Port 2.
FDL Options Facility Data Link is an ESF T1 port configuration option. The ESF
FDL transmits framing information, error events, and loopback
controls. FDL uses 4 kbit/s of bandwidth to transmit data. FDL
cannot be used unless the network service provider (telco) has
configured the T1 facility for ESF.
1. Press F to access the Configuration Menu (FDL Options).
Figure 2-5 Configuration Menu (FDL Options)
-- QPRI CONFIGURATION MENU (FDL OPTIONS)-- -- QPRI CONFIGURATION MENU (FDL OPTIONS)-- -- QPRI CONFIGURATION MENU (FDL OPTIONS)-- -- QPRI CONFIGURATION MENU (FDL OPTIONS)--
PORT 1 PORT 2 PORT 3 PORT 4
PORT 1 PORT 2 PORT 3 PORT 4 PORT 1 PORT 2 PORT 3 PORT 4 PORT 1 PORT 2 PORT 3 PORT 4
Sn) FDL Standard T1.403 T1.403 T1.403 T1.403 Sn) FDL Standard T1.403 T1.403 T1.403 T1.403 Sn) FDL Standard T1.403 T1.403 T1.403 T1.403 Sn) FDL Standard T1.403 T1.403 T1.403 T1.403
Mn) FDL Mode TERM TERM TERM TERM
Mn) FDL Mode TERM TERM TERM TERM Mn) FDL Mode TERM TERM TERM TERM Mn) FDL Mode TERM TERM TERM TERM
Pn) Poll Mode NO POLL NO POLL NO POLL NO POLL
Pn) Poll Mode NO POLL NO POLL NO POLL NO POLL Pn) Poll Mode NO POLL NO POLL NO POLL NO POLL Pn) Poll Mode NO POLL NO POLL NO POLL NO POLL
Cn) PRM C/R bit NONE NONE NONE NONE
Cn) PRM C/R bit NONE NONE NONE NONE Cn) PRM C/R bit NONE NONE NONE NONE Cn) PRM C/R bit NONE NONE NONE NONE
In) Idle Pattern FLAGS FLAGS FLAGS FLAGS
In) Idle Pattern FLAGS FLAGS FLAGS FLAGS In) Idle Pattern FLAGS FLAGS FLAGS FLAGS In) Idle Pattern FLAGS FLAGS FLAGS FLAGS
An) Send/Rec LLB BOP YES YES YES YES
An) Send/Rec LLB BOP YES YES YES YES An) Send/Rec LLB BOP YES YES YES YES An) Send/Rec LLB BOP YES YES YES YES
Bn) Send/Rec PLB BOP YES YES YES YES
Bn) Send/Rec PLB BOP YES YES YES YES Bn) Send/Rec PLB BOP YES YES YES YES Bn) Send/Rec PLB BOP YES YES YES YES
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
A [127.255.255.0] [0,11] QPRI >
A [127.255.255.0] [0,11] QPRI > A [127.255.255.0] [0,11] QPRI > A [127.255.255.0] [0,11] QPRI >