Verilink QPRI 2921 (880-503143-001) Product Manual - Manual (Page 51)

Configuring the QPRI 2921 Via the NCM 2000 Craft Interface
Verilink QPRI 2921 3-17
• Extension Number of Digits
• Extension Call Number
NOTE: Acceptance of the call profile does not imply the
completeness of the information required to describe your
configuration.
NOTE: After defining a call profile, select option S, Send Call Profile,
or the profile will not be saved/created.
Figure 3-12 PRI Port 1 Add Call Profile Menu
Table 3-13
PRI Port n Add Call Profile Menu Commands
Command Description Options
R Call Profile Ref—Select a reference ID that is distinct from previously used
IDs for the selected port. (Use the modify option to change existing call
profiles.)
1 through 48
D Call Direction—Select whether the call profile is for incoming calls,
outgoing calls, or both. “Delete” invalidates the call profile. We recommend
using the “Delete Call Profile” command in the Call Profile Configuration
Menu.
1) Delete
2) Incoming
3) Outgoing
4) Both
O No. of Own Digits—Enter the number of digits in your phone number. Note:
If the number is smaller than the length of an existing string associated
below, you will be prompted to confirm whether or not you want to
truncate the string. If the response to the prompt is Y, the associated string
will be truncated; otherwise, the length will not be accepted.
1 through 15
N Own Call Number—Enter your calling phone number. On incoming calls,
this number equals “DNIS”. On outgoing calls, this number is delivered as
“CLID” or “Station ID”. Note: If the entered string exceeds the associated
length above, the string will be truncated.
Phone number
of string length
specified above.
[0.0.0.5] [1,2] QPRI > a [0.0.0.5] [1,2] QPRI > a [0.0.0.5] [1,2] QPRI > a [0.0.0.5] [1,2] QPRI > a
-- QPRI 2921 PRI PORT 1 ADD CALL PROFILE MENU --
-- QPRI 2921 PRI PORT 1 ADD CALL PROFILE MENU -- -- QPRI 2921 PRI PORT 1 ADD CALL PROFILE MENU -- -- QPRI 2921 PRI PORT 1 ADD CALL PROFILE MENU --
R) Call Profile Ref 0
R) Call Profile Ref 0 R) Call Profile Ref 0 R) Call Profile Ref 0
D) Call Direction Deleted
D) Call Direction Deleted D) Call Direction Deleted D) Call Direction Deleted
O) No. of Own Digits 0
O) No. of Own Digits 0 O) No. of Own Digits 0 O) No. of Own Digits 0
N) Own Call Number ----
N) Own Call Number ---- N) Own Call Number ---- N) Own Call Number ----
I) Ext Numbering Plan ISDN-E.164
I) Ext Numbering Plan ISDN-E.164 I) Ext Numbering Plan ISDN-E.164 I) Ext Numbering Plan ISDN-E.164
U) Ext Numbering Type International
U) Ext Numbering Type International U) Ext Numbering Type International U) Ext Numbering Type International
C) Ext No. of Digits 0
C) Ext No. of Digits 0 C) Ext No. of Digits 0 C) Ext No. of Digits 0
P) Ext Call Number ----
P) Ext Call Number ---- P) Ext Call Number ---- P) Ext Call Number ----
T) Transfer Mode Unrestricted
T) Transfer Mode Unrestricted T) Transfer Mode Unrestricted T) Transfer Mode Unrestricted
B) Call Bandwidth B1=64K
B) Call Bandwidth B1=64K B) Call Bandwidth B1=64K B) Call Bandwidth B1=64K
M) MultiRate Count ----
M) MultiRate Count ---- M) MultiRate Count ---- M) MultiRate Count ----
A) Rate Adaption None
A) Rate Adaption None A) Rate Adaption None A) Rate Adaption None
E) Test Call Interval(min.) 0
E) Test Call Interval(min.) 0 E) Test Call Interval(min.) 0 E) Test Call Interval(min.) 0
S) Send Call Profile
S) Send Call Profile S) Send Call Profile S) Send Call Profile
X) Exit Screen
X) Exit Screen X) Exit Screen X) Exit Screen
[0.0.0.5] [1,2] QPRI >
[0.0.0.5] [1,2] QPRI > [0.0.0.5] [1,2] QPRI > [0.0.0.5] [1,2] QPRI >