Verilink QPRI 2921 (880-503143-001) Product Manual - Manual (Page 40)

Configuring the QPRI 2921 Via the NCM 2000 Craft Interface
3-6 Verilink QPRI 2921
Configuration Menu
Typing the command C from Main Menu displays the QPRI 2921
Configuration Menu. This menu provides access to the menus
used to configure the T1 port, data port, or ISDN PRI options.
Figure 3-3 Configuration Menu
Table 3-4 Configuration Menu Commands
T1 Port
Configuration
Menu
To access the T1 Port Configuration Menu, enter P from the
Configuration Menu.
To change a port configuration, enter the command followed by the
port number. For example, to remove port 2 from service, In, enter
I2 (n is a variable that identifies the port number).
Figure 3-4 QPRI 2921 T1 Port Configuration Menu
Following is a brief description of the T1 port configuration
parameters:
Command Description
P T1 port—Displays the QPRI 2921 T1 Port Configuration Menu, Figure 3-4, Table 3-5.
I ISDN PRI—Displays the PRI Configuration Menu, Figure 3-8, Table 3-9.
X Exit this Screen—Returns you to the Main Menu, Table 3-1, Table 3-2.
A [127.255.255.0] [0,11] QPRI > c A [127.255.255.0] [0,11] QPRI > c A [127.255.255.0] [0,11] QPRI > c A [127.255.255.0] [0,11] QPRI > c
-- QPRI CONFIGURATION MENU --
-- QPRI CONFIGURATION MENU -- -- QPRI CONFIGURATION MENU -- -- QPRI CONFIGURATION MENU --
P) T1 port I) ISDN PRI
P) T1 port I) ISDN PRI P) T1 port I) ISDN PRI P) T1 port I) ISDN PRI
X) Exit this screen
X) Exit this screen X) Exit this screen X) Exit this screen
A [127.255.255.0] [0,11] QPRI >
A [127.255.255.0] [0,11] QPRI > A [127.255.255.0] [0,11] QPRI > A [127.255.255.0] [0,11] QPRI >
A [127.255.255.0] [0,11] QPRI > p A [127.255.255.0] [0,11] QPRI > p A [127.255.255.0] [0,11] QPRI > p A [127.255.255.0] [0,11] QPRI > p
-- QPRI T1 PORT CONFIGURATION MENU --
-- QPRI T1 PORT CONFIGURATION MENU -- -- QPRI T1 PORT CONFIGURATION MENU -- -- QPRI T1 PORT CONFIGURATION MENU --
PORT 1 PORT 2 PORT 3 PORT 4
PORT 1 PORT 2 PORT 3 PORT 4 PORT 1 PORT 2 PORT 3 PORT 4 PORT 1 PORT 2 PORT 3 PORT 4
In) In Service YES YES YES YES
In) In Service YES YES YES YES In) In Service YES YES YES YES In) In Service YES YES YES YES
Fn) Frame Format ESF ESF ESF ESF
Fn) Frame Format ESF ESF ESF ESF Fn) Frame Format ESF ESF ESF ESF Fn) Frame Format ESF ESF ESF ESF
Ln) Line Coding B8ZS B8ZS B8ZS B8ZS
Ln) Line Coding B8ZS B8ZS B8ZS B8ZS Ln) Line Coding B8ZS B8ZS B8ZS B8ZS Ln) Line Coding B8ZS B8ZS B8ZS B8ZS
Bn) Line Build Out -15db -15db 0-133ft 0-133ft
Bn) Line Build Out -15db -15db 0-133ft 0-133ft Bn) Line Build Out -15db -15db 0-133ft 0-133ft Bn) Line Build Out -15db -15db 0-133ft 0-133ft
NDn) Network Density 12.5% 80s 12.5% 80s 12.5% 80s 12.5% 80s
NDn) Network Density 12.5% 80s 12.5% 80s 12.5% 80s 12.5% 80s NDn) Network Density 12.5% 80s 12.5% 80s 12.5% 80s 12.5% 80s NDn) Network Density 12.5% 80s 12.5% 80s 12.5% 80s 12.5% 80s
NLn) Network Initiated Loop YES NO NO NO
NLn) Network Initiated Loop YES NO NO NO NLn) Network Initiated Loop YES NO NO NO NLn) Network Initiated Loop YES NO NO NO
An) Alarm Declare Time(sec) 0 0 0 0
An) Alarm Declare Time(sec) 0 0 0 0 An) Alarm Declare Time(sec) 0 0 0 0 An) Alarm Declare Time(sec) 0 0 0 0
DLn) FDL Enable YES YES YES YES
DLn) FDL Enable YES YES YES YES DLn) FDL Enable YES YES YES YES DLn) FDL Enable YES YES YES YES
PRM Enable NO NO NO NO
PRM Enable NO NO NO NO PRM Enable NO NO NO NO PRM Enable NO NO NO NO
En) Enable ISDN Disabled Disabled N/A N/A
En) Enable ISDN Disabled Disabled N/A N/A En) Enable ISDN Disabled Disabled N/A N/A En) Enable ISDN Disabled Disabled N/A N/A
F) FDL configuration
F) FDL configuration F) FDL configuration F) FDL configuration
C) Copy port T) Timing
C) Copy port T) Timing C) Copy port T) Timing C) Copy port T) Timing
X) Exit this screen
X) Exit this screen X) Exit this screen X) Exit this screen
A [127.255.255.0] [0,11] QPRI >
A [127.255.255.0] [0,11] QPRI > A [127.255.255.0] [0,11] QPRI > A [127.255.255.0] [0,11] QPRI >