Verilink QPRI 2921 (880-503143-001) Product Manual - Manual (Page 48)

Configuring the QPRI 2921 Via the NCM 2000 Craft Interface
3-14 Verilink QPRI 2921
Figure 3-9 PRI Port Configuration Menu
Table 3-10 PRI Port Configuration Menu Commands
Command Description Options
In PRI In Service—ISDN stack on or off. Yes or No
(Y/N)
Fn NFAS Mode—Non-Facilities Associated Signalling. Only available on Port 1.
Makes both T1 channels mapable from the Port 1 D-channel. D-channel of
Port 1 would provide call control for both PRI ports forming 47B+D.
Note: This feature must be ordered with your ISDN service.
To activate NFAS Mode:
Use T1 Port Configuration Menu, Figure 3-4, to put T1 Ports 1 and 2 out of
service.
Deactivate both ISDN stacks—Port 1 and Port 2.
Select NFAS on Port 1 via the PRI Port Configuration Menu (command F1).
Reboot the module (You will be prompted to ensure that you really want to
do this).
Put Ports 1 and 2 back into service via the T1 Port Configuration Menu.
Reactivate the ISDN stacks on Port 1 ONLY (only allowed on Port 1).
1) No NFAS
2) NFAS
Dn D-Channel Mode—The D-channel bit pattern can be inverted. Use Inverted
D-channel if AMI is selected in the T1 Port Configuration Menu, Figure
3-4. For B8ZS select “Normal”.
1) Normal
2) Inverted
Bn D-Channel Bits—Signalling bit selection. If using AMI, select “7 bits”. For
B8ZS, select “8 bits”.
1) 8 bits
2) 7 bits
3) 6 bits
4) exit
Sn Switch Type—Enter the type of switch used by your ISDN carrier. There are
other options which are not supported.
1) unspecified
2) AT&T 4ESS
3) AT&T 5ESS
4) DMS-100
5) NI-2
[0.0.0.5] [1,2] QPRI > p [0.0.0.5] [1,2] QPRI > p [0.0.0.5] [1,2] QPRI > p [0.0.0.5] [1,2] QPRI > p
-- QPRI 2921 PRI PORT CONFIGURATION MENU --
-- QPRI 2921 PRI PORT CONFIGURATION MENU -- -- QPRI 2921 PRI PORT CONFIGURATION MENU -- -- QPRI 2921 PRI PORT CONFIGURATION MENU --
PORT 1 PORT 2
PORT 1 PORT 2 PORT 1 PORT 2 PORT 1 PORT 2
In) PRI In Service No No
In) PRI In Service No No In) PRI In Service No No In) PRI In Service No No
Fn) NFAS Mode No NFAS No NFAS
Fn) NFAS Mode No NFAS No NFAS Fn) NFAS Mode No NFAS No NFAS Fn) NFAS Mode No NFAS No NFAS
Dn) D-Channel Mode Normal Normal
Dn) D-Channel Mode Normal Normal Dn) D-Channel Mode Normal Normal Dn) D-Channel Mode Normal Normal
Bn) D-Channel Bits 8 bits 8 bits
Bn) D-Channel Bits 8 bits 8 bits Bn) D-Channel Bits 8 bits 8 bits Bn) D-Channel Bits 8 bits 8 bits
Sn) Switch Type DMS 100 DMS 100
Sn) Switch Type DMS 100 DMS 100 Sn) Switch Type DMS 100 DMS 100 Sn) Switch Type DMS 100 DMS 100
Pn) Own Numbering Plan ISDN-E.164 ISDN-E.164
Pn) Own Numbering Plan ISDN-E.164 ISDN-E.164 Pn) Own Numbering Plan ISDN-E.164 ISDN-E.164 Pn) Own Numbering Plan ISDN-E.164 ISDN-E.164
Nn) Own Numbering Type National National
Nn) Own Numbering Type National National Nn) Own Numbering Type National National Nn) Own Numbering Type National National
En) Security Level No checks No checks
En) Security Level No checks No checks En) Security Level No checks No checks En) Security Level No checks No checks
Ln) L2 auto establish No No
Ln) L2 auto establish No No Ln) L2 auto establish No No Ln) L2 auto establish No No
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
[0.0.0.5] [1,2] QPRI >
[0.0.0.5] [1,2] QPRI > [0.0.0.5] [1,2] QPRI > [0.0.0.5] [1,2] QPRI >