Verilink WANsuite 5330 (34-00302.F) Product Manual - Manual (Page 11)

P r e f a c e xi
C HAPTER 0
P
REFACE
About this Manual
This reference guide for the Verilink WANsuite 5330 intelligent integrated
access device (I
2
AD) describes unit features and specifications, configuration,
and cabling. It is not a users guide containing step-by-step procedures. Rather,
this manual is designed to be used as a reference regarding commands,
interface ports, configuration parameters, and other specific information about
the WANsuite 5330.
Manual Organization
The chapters and appendices in this manual are arranged for quick reference
when you need it. You do not have to read previous chapters to understand
the subsequent chapters. Appendices are designed to complement the main
chapters.
•
Chapter 1, "About the WANsuite 5330" – This chapter describes product
features and capabilities.
• Chapter 2, "Installation" – This chapter describes unit port connections and
powering information.
• Chapter 3, "Web Server Interface" – This chapter describes the menu screens
and configuration parameters accessed through the Web server interface.
• Chapter 4, "VT100 Interface"
−
This chapter describes the menu screens and
configuration parameters accessed through the VT100 interface.
•
Appendix A, "Specifications" – This appendix defines the specifications for
the WANsuite 5330. In addition, this section provides ordering information
and all the connector pin assignments for the interfaces on the back of the
WANsuite 5330 units.
•
Appendix B “SNMP Agent” – This appendix defines which Management
Information Base (MIB) files are supported by the WANsuite 5330 SNMP
agent. In addition, instructions are provided for loading these MIB files into
most SNMP management stations.