Verilink WANsuite 5330 (34-00302.F) Product Manual - Manual (Page 59)

W e b S e r v e r I n t e r f a c e 3-31
The Endpoint Details screen provides the following user-activated buttons:
Endpoint Service Details Screen
Clicking on the “Endpoint Service Details” button at the bottom of the
Endpoint Table screen displays the typical Service Details screen. Refer to
Service Details Screen on page 3-14 for a complete description of this type of
screen.
DLCI Details Screen
The DLCI Details screen (Figure 3.23) lets you access the configuration
parameters described in the paragraphs below. To bring up this screen, click
the “Endpoint DLCI Details” button on the Endpoint Table screen, or the
“DLCI Details” button on the Endpoint Details screen.
Figure 3.23 DLCI Details Screen
The unit uses the first three configuration parameters (Protocol Encapsulation,
Proprietary Traffic Type, and Proprietary Offset) displayed on this screen to
Button Function
Submit Sets any values that have been changed.
Service Details Opens the Service details screen showing the selected service's
settings.
DLCI Details Displays details of the selected DLCI.
Delete Endpoint Deletes the currently displayed endpoint.
Refresh Refreshes data on the current page.