Visara iCON-XT - Manual (Page 114)

5-48 707096-005
iCON-XT Single Station Console Terminal User’s Manual
Configuring VT220 for an application
VT220 can be configured for a particular application by selecting Screen,
Keyboard or Color from the Setup menu.
Screen setup
From the main VT220 application screen:
1. Click Setup to open the VT220 Setup menu.
2. Click Screen.
• Cursor – Choose either an underline cursor or a block cursor.
• Blink – Select for a blinking cursor.
• Alternate Style – If reverse video is being used, selecting this will make the
cursor displayable.
• Full Screen Mode – Select to open the VT220 application in Full Screen Mode.
VT220 must be closed and reopened for this setting to become effective.
Note: To access the taskbar or minimized applications on the taskbar while
Full Screen Mode is in effect, hold down the Shift and Alt keys while
pressing the tab key. Press the tab key repeatedly until the name of the
application you wish to bring to the front is displayed.
To access the setup menu from full screen mode, press Ctrl-Shift-S.
Click OK to save changes and close Screen Setup, or Cancel to close and
discard any changes.