Communications, Connect, Disconnect – Visara iCON-XT User Manual
Page 65: Enable autoconnect, Enable failover, Communications -13
707096-005
4-13
Chapter 4. VT5250 Twinax Emulator
The password needed to access a VT5250 session may be changed using Password
Manager. Enter the existing User Name and current password. Enter a new password,
and verify by entering the password again.
Communications
Move pointer over Communications on the menu bar to display the drop down menu.
Connect
Activate your connection to the currently selected host session.
Disconnect
Deactivate your connection to the selected host session.
Enable AutoConnect
If AutoConnect is enabled, this session will automatically be started when Session
Manager is started.
Enable Failover
If this feature is enabled and the session fails, VT5250 will search all the servers in the
Server List for a session by the same name. If this session is active, VT5250 will connect
to it.