AEC HE Mass Flow Series Drying hoppers - Manual (Page 47)

Page 46 HE
• CHE • BCHE Mass Flow Series Drying Hoppers
Figure 17
Available Option Boards
Option type RS232C RS-485 Event input Transfer output
Board no. E53-CK01 E53-CK03 E53-CKB E53-CKF
Notes:
• Option Mode only visible when an option board is installed.
• Use default settings for Communications board. Contact AEC Whitlock Engineering
for settings on “Event Input” and “Transfer Output” boards.
Mode Parameter Setting range Default AEC setting
Option Eu-A Multi-SP Function 0/1 0 Default
Option Eu-1 Event Input Assign 1 STOP/MAN STOP Default
Option SbCE Communication Stop Bit ½ BITS 2 Default
Option LEn Comm. Data Length 7/8 BITS 7 Default
Option PrEY Communication Parity None/Even/Odd Even Default
Option 6PS Comm. Baud Rate 1.2/2.4/4.8/9.6/19.2 9.6 kbps Default
Option U-n6 Comm. Unit No. 0 to 99 0 Default
Option Er-E Transfer Output Type SP/SP-M/PV/O/C-O SP Default
Option Er-H Xfer Output Upper Limit 5 5 Default
Option Er-L Xfer Output Lower Limit 5 5 Default