Grass Valley 8900NET v.4.4.0 - Manual (Page 26)

26 8900NET (Net Card) — Instruction Manual
Web Browser Setup
Web Browser Notes
• If applicable, configure the browser for direct HTTP requests to the
frame rather than addressing a Proxy Web Server. The Modular Frame
Web Server will typically be installed inside the firewall.
• For older Netscape browsers, the Cache should be configured to always
refresh.
Addressing the Frame URL
To address an 8900 frame from an internet browser, enter the frame’s
default URL into the URL line of the browser (“Location” in Netscape Nav-
igator, “Address” in Internet Explorer). The URL will be the IP Address
given to the frame during initial setup (see
Setting Frame Network Identity on
page 23 ), or a Domain name that has been mapped to the IP Address in
your Domain Name Server tables. The URL should look like this:
http://{Frame’s IP Address}/
Example:
http://127.123.234.2/
Or:
http://{Frame’s Domain Name}/
Example:
http://frame1.xyz.com/
The correctly entered URL will call up the Gecko frame’s default first
page—Frame Status.
Default MAC (machine) Address
Each 8900 frame has a unique ethernet physical level MAC address that is
stored in the frame ID memory chip (see
Figure 6 on page 14 ). If this
memory is missing, the 8900NET module will substitute a default MAC
address: 08-00-11-09-CD-AB. If more than one 8900 frame in your network
is assigned the default MAC address, network conflicts will occur. To verify
the frame has a unique MAC address refer to
8900NET Network Web Page
on page 62 .