Grass Valley 8900NET v.4.4.0 - Manual (Page 75)

8900NET (Net Card) — Instruction Manual 75
Troubleshooting GUI Operation
block of the 8900NET module is Enabled, and
Check that the MODULE HEALTH REPORTING parameter on the frame’s
CONFIGURATION page is Enabled.
• Check that the SNMP Manager is properly configured to receive the
Event Messages.
Check that the SNMP Manager has been assigned the same commu-
nity name as in the frame’s configuration.
6. Check the network connectivity between the SNMP Manager and the
frame as described in the steps on
page 69 .