SMA Sunny Data Control V.4.2 - Manual (Page 69)

SMA Technologie AG Displaying Data
User Manual SDC-TEN080642 Page 69
4. In the "Available channels" list, select the channel which is to form the basis of the
capacity utilization calculation, and is to be reflected in the color behavior of the
device fields.
5. Enter the chosen channel using the arrow key ">" in the area
6. In the field to the left of "= 100 %“, enter the value which is to represent 100 %
capacity utilization for this channel.
7. Click on < Apply> to save your changes.
You can set the color scheme of the device fields as described in section 10. 5
„Changing the Color Behavior of the Device Fields” (page 72).
Changes color according
to the calculated capacity utiliz
(depending on the value
defined as 100 %)
Device field
Example