SMA Sunny Data Control V.4.2 - Manual (Page 88)

Displaying Data SMA Technologie AG
Page 88 SDC-TEN080642 User Manual
10.9. 3 Saving a Device Overview
If you change a device overview, you must save the settings as follows:
1.
Open the window in which the spot value queries are displayed by clicking on the
"Spotvalues" tab at the lower edge of the screen.
2. Click on "Spotvalues / Overview Management". The "Overview Management"
window opens (see figure below).
You can also call up the window by clicking anywhere on the screen with the right
mouse button and selecting "Overview Management".
All device overviews which have already been created are shown in the "Avail-
able Plants" list.
3. Click on the name of the device overview for which you would like to save chang-
es.
4. Click <Save>.