SMA STP 10000TL-10 Installation - Manual (Page 14)

3 Product Description SMA Solar Technology AG
14 STP10-17TL-IA-en-32 Installation Manual
3 Product Description
The Sunny Tripower is a multi-string inverter which converts the direct current of a PV array into
alternating current. To do this, the Sunny Tripower is equipped with two separate MPP trackers which
can be connected to the different PV modules. The inverter performs three-phase feed-in of electricity
into the electricity grid. Cooling is effected via the OptiCool active cooling system.
In addition, Sunny Tripower is equipped with the features described below.
3.1 Bluetooth
The inverter is equipped with a serial Bluetooth interface and can communicate with special
SMA communication products and other inverters (for information on supported products,
see www.SMA-Solar.com).
If you would like to communicate via Bluetooth, you can protect the inverter with one system password
for the user and one system password for the installer. All inverters are delivered with a standard
system password for the user (0000) and a standard system password for the installer (1111).
To protect the system from unauthorised access, you must change the system passwords using
Sunny Explorer (for information on changing the system password, refer to the Sunny Explorer help).
If you do not want to communicate via Bluetooth, deactivate Bluetooth communication
(see Section 6.6.1 "Bluetooth", page 52).
3.2 Communication Interface
The inverter can optionally be fitted with an extra communication interface (e.g., RS485).
This communication interface enables the inverter to communicate with special SMA communication
products or other inverters (for information on supported products, see www.SMA-Solar.com).
The interface can either be retrofitted or installed at the factory according to a specific order.
You can only set the operating parameters of the inverter via SMA communication products.
You can set the country data set of the inverter via the two rotary switches in the inverter only prior to
commissioning or within the first ten operating hours.
Depending on the type of communication, RS485 or Bluetooth or Speedwire, the parameters and
messages are displayed differently in the communication products.
Example: How the country data set parameter is displayed
• For communication with RS485: CntrySet parameter
• If you are using Bluetooth or Speedwire: parameter Set country standard