SMA STP 10000TL-10 Installation - Manual (Page 39)

SMA Solar Technology AG 6 Electrical Connection
Installation Manual STP10-17TL-IA-en-32 39
4. Push the swivel nut up to the thread and tighten (torque: 2.0 Nm).
☑ The DC connectors are assembled and ready for connection to the inverter (see Section 6.4.4
"Connecting the PV Array (DC)", page 40).
6.4.3 Opening the DC Connector
1. Unscrew the swivel nut.
2. To release the DC connector: Insert a 3.5 mm
screwdriver into the snap slot on the side and lever
it open.
3. Carefully pull the DC connector apart.
4. Release the clamping bracket. To do this,
use a 3.5 mm screwdriver.
5. Remove the cable.
☑ The cable is now detached from the DC connector.