SMA STP 10000TL-10 Installation - Manual (Page 19)

SMA Solar Technology AG 4 Unpacking
Installation Manual STP10-17TL-IA-en-32 19
4.2 Identifying the Inverter
You can identify the inverter by the type label. The type label is located on the right-hand side of the
enclosure.
The inverter serial number (Serial No.), the type (Type/Model) and other device-specific
characteristics are specified on the type label.
H 10/12 Sealing plug
Sunny Tripower 10000TL / 12000TL: 10 each
Sunny Tripower 15000TL / 17000TL: 12 each
I 1 Eye bolt (M8) for fastening the Sunny Tripower to the rear panel
K 2 Cylinder screws (M5x10) for fastening the enclosure to the rear panel
L 1 Cable gland for AC connection
M 1 Counter nut for cable gland at AC connection
N 1 Clamping bracket (M6) for additional earthing
O 1 Cheese-head screw (M6) for earth terminal
P 1 Conical spring washer (M6) for earth terminal
Q 2 Cheese-head screws (M5x20) for upper enclosure lid (spares)
R 2 Conical spring washers (M5) for enclosure lid screws (spares)
Object Quantity Description