SMA STP 10000TL-10 Installation - Manual (Page 58)

7 Commissioning SMA Solar Technology AG
58 STP10-17TL-IA-en-32 Installation Manual
7.2 Display Messages during the Start Phase
• The firmware version of the internal processors
appears first in the text line.
• After an interval of five seconds, or after tapping on
the enclosure lid, the serial number (or designation
of the inverter) and the NetID for communication
via Bluetooth will appear. The designation of the inverter can be changed with a communication
product.
• After a further five seconds or a further tap, the
configured country standard is displayed
(example: "VDE0126-1-1").
• After a further five seconds or another tap, the
configured language is displayed
(example: "Language English").
• During normal operation, the text line of the display will subsequently be blank. See Section 11
for event messages which may be displayed in the text line and their meaning.
Illustrated display messages
The display messages illustrated in this section serve as examples and, depending on the
country setting, may differ from the actual display messages on your inverter.
Showing display messages again (valid from Firmware Version 2.33)
If you want to view the display messages of the start-up phase again during normal operation,
tap the enclosure lid twice in quick succession.
Language english