Yaskawa YASNAC PC NC Connecting Manual User Manual
Page 34
Advertising
1 - 16
YASNAC PCNC Connecting ManualChapter 1: General
1.5.3
Installing the Feed/Spindle Servopacks (Amplifiers)
•
The Servopack is to be wall-mounted vertically using screws or bolts.
•
Locate the Servopack so that inspection, maintenance and part replacement can be easily
made.
•
The Servopack will generate some heat, so mount with sufficient space around the unit.
•
To reduce heat generation, mount the cooling fin external to the Servopack’s enclosure with
the fan blowing air on the cooling fin @ 2.5m/s.
•
Internal air should not be blown directly onto the Servopack since this could cause dust con-
tamination.
Cooling fin
Feed Servopack
External Air
Fig. 1.5.3.1 Cooling Fin Installed Outside of Enclosure
Converter & Inverter
Advertising