Yaskawa YASNAC PC NC Connecting Manual - Manual (Page 76)

8 - 2
YASNAC PCNC Connecting Manual Chapter 8: Connection of Direct-IN/OUT Signals to the CNC
8.1 Connection between Devices
This section addresses the connection of direct IN/OUT signals to be input/output directly to
and from the PCNC unit, the type of connector and the cable specifications.
8.1.1 Connection to the PCNC Unit
8.2 Detailed Connection of Direct-IN/OUT
This section describes the detailed connection of the direct IN/OUT signals to be input/output
directly to and from the PCNC unit.
8.2.1 Connection to the PCNC Unit
(1) Connection of Direct IN Signal
(a) For 0 V Common
PCNC unit
JZNC-JFC10
CN14
10220-52A2JL
UL20276 AWG 28 X 10 pairs
10120-3000VE
(10320-52A0-008)
Direct
IN/OUT
FIGURE 8.1.1.1 Connection between Devices
CN14-10
CN14-14
CN14-18
CN14-2 0V
CN14-17
CN14-1 0V
+24V
COM
DIN1
DIN2
Direct IN 1
Direct IN 2
JZNC-JFC10
PCNC UNIT
FIGURE 8.2.1.1 Connection Details of Direct IN (for 0V Common)