Yaskawa YASNAC PC NC Connecting Manual - Manual (Page 96)

10 - 9
YASNAC PCNC Connecting Manual Chapter 10: Connection of General Purpose I/O
JANCD-FC810/FC815/FC860
CN5 Connector
Pin No. Address No. Bit No.
(49) #1009.0
(48) #1009.1
(47) #1009.2
(46) #1009.3
(45) #1009.4
(44) #1009.5
(43) #1009.6
(42) #1009.7
0
24
Power Supply
0V +24V
.
(Address number and bit number: #1009.0 to #1009.7)
(29) COM 42
.
(1-3)
FIGURE 10.2.1.6 FC810/FC815/FC860 Module Connection
POINT
1. The above example shows one connection of +24V common. As for the connection of
0V common, refer to “10.3.2 (1) Module (JANCD-FC810/FC815/FC860).”
2. The address is that of module No. 1 (#1009.0 to #1009.7). In modules Nos. 2 and 3,
the layout is as shown above starting from the smaller address number. For details,
refer to“10.3.1 I/O Port”.