Yaskawa YASNAC PC NC Connecting Manual - Manual (Page 37)

2 - 3
YASNAC PCNC Connecting Manual Chapter 2: Power Supply
2.1.2 Power Supply Connections to PCNC
2.1.3 Power Supply Connections to PCNC and I/O Units
1 +24V
2 0
24
V
3 FANALM
CNC unit Power supply unit(UPS00004)
JANCD-JFC10 CN05(1-178293-2)
+24VDC
Stabilized power supply
+24VDC+10%
3.0 A min. (Note*)
*Note: Derating for ambient temperature should be considered.
AC Power Supply
180V-264V AC
Single phase
FIGURE 2.1.2.1 Power Supply to PCNC Unit when using recommended Power Supply Unit.
+24V supply
(UPS00004)
CN05 CN04
Machine Tool
Builder supply
+24V according
to I/O
requirements.
5V DC & GND
UWR00307
24V DC
GND
24V 5V
UWR00306
JANCD-FC8_ _
JANCD-FC8_ _
JSP04/JSP02
JANCD-JIF10
PCNC UNIT
Terminal
Block
CN 13
CN 14
CN 13
CN 14
CN 05
CN 06
* To be provided by Machine Tool builder
*
UWR00305
+24VDC
FIGURE 2.1.3.1 Power Supply to PCNC unit when using recommended Power Supply Unit